Mpempe akwụkwọ mpempe akwụkwọ PFCP203 phenolic
Ntuziaka ngwaahịa
Mpempe akwụkwọ laminate nke phenolic bụ ụdị ihe ngwakọta nke emere site na itinye akwụkwọ na resin phenolic wee gwọọ ya n'okpuru okpomọkụ na nrụgide.
Nrube isi na ụkpụrụ
IEC 60893-3-4: PFCP203.
Ngwa
Ngwa igwe na eletriki.Ezi ihe ọkụ eletrik dị na iru mmiri nkịtị.Ọ dịkwa na ụdị ịkụ ọkpọ ọkụ.
Ụbọchị nka na ụzụ isi
| Ngwongwo | Nkeji | Usoro | Ụkpụrụ ọkọlọtọ | Uru a na-ahụkarị |
| Ike na-agbanwe agbanwe na laminations - n'okpuru okpomọkụ ụlọ nkịtị | MPa |
ISO 178 | ≥120 | 135 |
| Ike dielectric perpendicular na laminations (na mmanụ 90 ± 2 ℃),0.5mm na ọkpụrụkpụ | kV/mm |
IEC 60243 | ≥7.6 | 8.5 |
| Voltaji ndakpọ parallel kalaminations (na mmanụ 90 ± 2 ℃) | kV |
IEC 60243 | ≥15 | 26 |
| Mgbochi mkpuchi etinyere na mmiri, D-24/23 | Ω | IEC60167 | ≥5.0×107 | 7.5×107 |
| Ntinye mmiri,0.5mm na ọkpụrụkpụ | mg |
ISO 62 | ≤162 | 108 |
| Njupụta | g/cm3 | ISO 1183 | 1.30-1.45 | 1.37 |
FAQ
Q1: Ị bụ ụlọ ọrụ azụmaahịa ma ọ bụ emeputa?
Anyị bụ ndị na-eduga emeputa nke eletriki mkpuchi ihe mejupụtara, Anyị na-etinye aka na emeputa thermoset isiike mejupụtara kemgbe 2003.Our ikike bụ 6000TONS / afọ.
Q2: Nlereanya
Ihe nlele bụ n'efu, naanị ị ga-akwụ ụgwọ maka mbupu.
Q3: Kedu ka ị ga-esi kwe nkwa ịdị mma nke mmepụta oke?
Maka ọdịdị, nha na ọkpụrụkpụ: anyị ga-eme nyocha zuru ezu tupu ịkwakọ ngwaahịa.
Maka ịdị mma arụmọrụ: Anyị na-eji usoro edoziri, ma ga-abụ nyocha nlele mgbe niile, anyị nwere ike ịnye akụkọ nyocha ngwaahịa tupu ebupu ya.
Q4: Oge nnyefe
Ọ na-adabere n'ụdị ọnụ ọgụgụ. N'ikwu okwu n'ozuzu, oge nnyefe ga-abụ ụbọchị 15-20.
Q5: ngwugwu
Anyị ga-eji akwụkwọ nka ọkachamara na ngwugwu na plywood pallet.if ị nwere ihe ngwugwu pụrụ iche chọrọ, anyị ga-ebukọta dị ka mkpa gị.
Q6: ịkwụ ụgwọ
TT, 30% T / T n'ihu, itule tupu mbupu. Anyị na-anabata L / C.
