Igwe ọkụ eletrik dị elu nke China G10 Fr4 3240 Epoxy Phenolic Fiber Glass Fabric na Resin Laminated Sheet Factory
N'iburu nke a n'uche, anyị aghọọla otu n'ime ndị nrụpụta teknụzụ kachasị ọhụrụ, ndị na-akwụ ụgwọ na-arụ ọrụ nke ọma, na ndị na-asọ mpi maka China Electric Insulation G10 Fr4 3240 Epoxy Phenolic Fiber Glass Fabric na Resin Laminated Sheet Factory, Ebumnuche anyị bụ “ọkụ ọkụ. ala ọhụrụ, Na-agafe Uru ", n'ọdịnihu, anyị na-akpọ gị òkù ka ị tolite na anyị ma mee ọdịnihu dị mma ọnụ!
N'iburu ụkpụrụ a n'uche, anyị abụrụla otu n'ime ndị nrụpụta teknụzụ kachasị ọhụrụ, ndị na-akwụ ụgwọ dị oke ọnụ, na ndị na-asọmpi maka ọnụahịa.Epoxy Glass Fiber mpempe akwụkwọ China, Mkpuchi Laminated Board, Na narị afọ ọhụrụ, anyị na-akwalite mmụọ ọrụ anyị “United, ịdị uchu, elu arụmọrụ, ọhụrụ”, na arapara anyị amụma”basing on àgwà, na-enprising, pụtara maka mbụ klas ika”.Anyị ga-eji ohere ọla edo a mepụta ọdịnihu dị mma.
Nkọwa ngwaahịa
3240 Epoxy phenolic glass fiber laminated mpempe akwụkwọ (ọkwa A):Ngwaahịa a bụ ngwaahịa eletrọnịkị nke alkali na-enweghị ebu
iko ákwà impregnated na epoxy phenolic resin site na-ekpo ọkụ pressing.The thermostablity bụ ọkwa B.It nwere ezi n'ibu na dielectrical Njirimara, ọ na-ọtụtụ-eji moto, eletriki akụrụngwa dị ka insulating ihe na components, na-adabara n'okpuru mmiri na gburugburu ebe obibi na transformer mmanụ. .
3240 Epoxy phenolic glass fiber laminated mpempe akwụkwọ (ọkwa B):Ngwaahịa a bụ ngwaahịa eletrọnịkị nke alkali na-enweghị ebu
akwa akwa iko etinyere na resin epoxy phenolic site na ịpị ọkụ.
N'ihi na 3240-B dị ọnụ ala karịa 3240-A ma nwee ezi omume, ọ na-adịkarị n'ahịa.Maka ozi ndị ọzọ, biko jiri obiọma kpọtụrụ onye na-ere ahịa anyị.
Nrube isi n'ụkpụrụ
Dị ka GB /T 1303.4-2009 eletriki thermosetting resin ụlọ ọrụ siri ike laminates - Nkebi 4: epoxy resin hard laminates, IEC 60893-3-2-2011 ihe mkpuchi - Igwe ọkụ ọkụ ọkụ ọkụ ụlọ nrụpụta siri ike laminates - Nkebi 3-2 nke ihe onye ọ bụla. nkọwapụta EPGC201.
Atụmatụ
1.Good n'ibu Njirimara;
2.Good dielectrical Njirimara;3.Moisture eguzogide, adabara n'okpuru mmiri gburugburu na transformer mmanụ.
4.Good machinability Njirimara
5.Temperature na-eguzogide: Klas B, 130 ℃
Ngwa
1) A na-eji ihe arụ ọrụ arụ ọrụ chọrọ nke moto dị elu, akụrụngwa eletriki na akụkụ ral struct insulating
2) ICT, ITE na-achị nhazi nke akụkụ mkpuchi, ihe nrụnye ule, isi igodo silicon roba ebu.
3) Fixture efere, ebu plywood, countertops egweri efere, nkwakọ igwe, comb, wdg
Ndekọ arụmọrụ isi
| Mba. | ITEM | UNIT | Uru INDEX | |
| 01 | Njupụta | g/cm³ | 1.8-2.0 | |
| 02 | Ntinye mmiri | % | <0.5 | |
| 03 | Ike ịgbagọ kwụ ọtọ | MPa | ≥340 | |
| 04 | Ike mkpakọ kwụ ọtọ | MPa | ≥350 | |
| 05 | Ike mmetụta (ụdị charpy) | KJ/m² | ≥33 | |
| 06 | Ike ọdụdọ | MPa | ≥200 | |
| 07 | Vetikal eletriki ike (na mmanụ nke 90 ℃ ± 2 ℃) | 1mm | MV/m | ≥14.2 |
| 2mm | ||||
| ≥11.8 | ||||
| 3mm | ||||
| ≥10.2 | ||||
| 08 | Parallel mmebi voltaji (na mmanụ nke 90 ℃ ± 2 ℃) | KV | ≥35 | |
| 09 | Dielectric mgbe niile (50Hz) | - | ≤5.5 | |
| 10 | Ihe mgbasa dielectric (50Hz) | - | ≤0.04 | |
| 11 | Mgbochi mkpuchi mgbe ịsachara (mgbe ịsachara maka awa 24) | MΩ | ≥5.0×104 | |
N'iburu nke a n'uche, anyị aghọọla otu n'ime ndị nrụpụta teknụzụ kachasị ọhụrụ, ndị na-akwụ ụgwọ na-arụ ọrụ nke ọma, na ndị na-asọ mpi maka China Electric Insulation G10 Fr4 3240 Epoxy Phenolic Fiber Glass Fabric na Resin Laminated Sheet Factory, Ebumnuche anyị bụ “ọkụ ọkụ. ala ọhụrụ, Na-agafe Uru ", n'ọdịnihu, anyị na-akpọ gị òkù ka ị tolite na anyị ma mee ọdịnihu dị mma ọnụ!
Ịdị mma Dị eluEpoxy Glass Fiber mpempe akwụkwọ China, Mkpuchi Laminated Board, Na narị afọ ọhụrụ, anyị na-akwalite mmụọ ọrụ anyị “United, ịdị uchu, elu arụmọrụ, ọhụrụ”, na arapara anyị amụma”basing on àgwà, na-enprising, pụtara maka mbụ klas ika”.Anyị ga-eji ohere ọla edo a mepụta ọdịnihu dị mma.
