GPO-3 POLYESTER GLASS MAT IBE AKWỤKWỌ NKE NA-ECHICHE (UPGM203)
Ntuziaka ngwaahịa
UPGM203/GPO-3 bụ ihe mpempe akwụkwọ polyester akwadoro enyo.GPO-3 siri ike, isiri ike, kwụsie ike n'ụdị ya, yana enweghị mmetụta.Ngwa ahụ nwekwara ezigbo ọkụ eletrik gụnyere ọkụ, arc, na nguzogide egwu.A na-ejikarị ya eme ihe maka mkpuchi ọkụ eletrik
Nrube isi na ụkpụrụ
IEC 60893-3-5:2003
Ngwa
Ihe a na-ejikarị eme ihe bụ ịkwado na ikewapụ ọkụ eletrik na akụrụngwa nkesa ọkụ eletrik.Ngwa GPO-3 gụnyere nkwado mmanya ụgbọ ala na ihe nrịgo na ihe mkpuchi ngwa voltaji dị elu.
Foto ngwaahịa
Ụbọchị nka na ụzụ isi(pịa ebe a iji budata akụkọ nnwale ndị ọzọ)
| Ihe | IHE Nnwale | UNIT | UZỌ anwale | Uru ọkọlọtọ | Nsonaazụ ule |
| 1 | Ike mgbanwe n'ụzọ kwụ ọtọ na laminations E-1/130: N'okpuru 130±2℃ | MPa | ISO178 | ≥130 | 205 |
| 2 | Ike mmetụta ya na lamination (Izod, nottched) | kJ/m2 | ISO 180 | ≥35 | 56 |
| 3 | Electric ike perpendicular ka laminations (na mmanụ, 90 ± 2 ℃), 2 mm na ọkpụrụkpụ | kV/mm | IEC 60243 | ≥10.5 | 12.5 |
| 4 | Ike eletrik kwụ ọtọ laminar (mmanụ 90 ± 2 Celsius C), ọkpụrụkpụ efere 2 mm | ||||
| 5
| Voltaji nbibi yiri laminations (na mmanụ, 90± 2 ℃) | kV | IEC 60243 | ≥35 | 80 |
| 6 | Ntinye mmiri (4 mm n'obosara) | mg | ISO 62 | ≤63 | 31 |
| 7 | Mkpuchi mkpuchi mgbe 24 h imikpu mmiri, D-24/23 | MΩ | IEC 60167 | ≥5.0×102 | 6,5×105 |
| 8 | Ndekọ nsochi atụnyere (CTI) | V | IEC 60112 | ≥500 | 600 |
| 9 | Ndepụta na mgbochi mbuze | Klas | IEC 60587 | 1B 2.5 | Gafe |
| 10 | Njupụta | g/cm3 | ISO 1183 | 1.70-1.90 | 1.86 |
| 11 | Ịkụ ọkụ | Klas | IEC 60695 | V0 | V0 |
| 12 | Ike mkpakọ perpendicular na laminations | MPa | ISO 604 |
| 300 |
| 13 | Ike ọdụdọ | MPa | ISO 527 |
| 85 |
| 14 | Nguzogide Arc | s | IEC 61621 |
| 180 |
| 15 | Ntachi obi nke thermal | TI | IEC 60216 |
| 130 |
FAQ
Q1: Ị bụ ụlọ ọrụ azụmaahịa ma ọ bụ emeputa?
Anyị bụ ndị na-eduga emeputa nke eletriki mkpuchi ihe mejupụtara, Anyị na-etinye aka na emeputa thermoset isiike mejupụtara kemgbe 2003.Our ikike bụ 6000TONS / afọ.
Q2: Nlereanya
Ihe nlele bụ n'efu, naanị ị ga-akwụ ụgwọ maka mbupu.
Q3: Kedu ka ị ga-esi kwe nkwa ịdị mma nke mmepụta oke?
Maka ọdịdị, nha na ọkpụrụkpụ: anyị ga-eme nyocha zuru ezu tupu ịkwakọ ngwaahịa.
Maka ịdị mma arụmọrụ: Anyị na-eji usoro edoziri, ma ga-abụ nyocha nlele mgbe niile, anyị nwere ike ịnye akụkọ nyocha ngwaahịa tupu ebupu ya.
Q4: Oge nnyefe
Ọ na-adabere n'ụdị ọnụ ọgụgụ. N'ikwu okwu n'ozuzu, oge nnyefe ga-abụ ụbọchị 15-20.
Q5: ngwugwu
Anyị ga-eji akwụkwọ nka ọkachamara na ngwugwu na plywood pallet.if ị nwere ihe ngwugwu pụrụ iche chọrọ, anyị ga-ebukọta dị ka mkpa gị.
Q6: ịkwụ ụgwọ
TT, 30% T / T n'ihu, itule tupu mbupu. Anyị na-anabata L / C.