Ngwaahịa

Ụlọ ọrụ na-eme China Fiberglass Reinforced Plastic Sheet Laminated

Nkọwa dị mkpirikpi:


  • Ọkpụrụkpụ:0.3mm-80mm
  • Akụkụ:970*1970mm 970*1200mm
  • Agba:Agba aja aja
  • Nhazi:Nhazi dabere na eserese
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    Anyị na-eche mgbe niile ma na-eme ihe kwekọrọ na mgbanwe nke ọnọdụ, na-eto eto.We purpose at the achieve of a richer mind and body as well as living for Factory making China Fiberglass Reinforced Plastic Sheet Laminated, Ime ihe n'eziokwu bụ ụkpụrụ anyị, nkà usoro bụ anyị ịrụ, ọrụ bụ anyị lekwasịrị, na ahịa 'afọ ojuju bụ ogologo okwu anyị!
    Anyị na-eche mgbe niile ma na-eme ihe kwekọrọ na mgbanwe nke ọnọdụ, na-eto eto.Anyị na-ebu n'obi na mmezu nke a ọgaranya uche na ahụ nakwa dị ka ibi makaAkwụkwọ ikike nchekwa ọkụ China, Mpempe akwụkwọ Polyimide eletriki, Afọ ojuju ndị ahịa bụ ihe mgbaru ọsọ anyị.Anyị na-atụ anya nkwado gị na ịnye ọrụ anyị kacha mma n'ọnọdụ gị.Anyị ji obi ụtọ na-anabata gị ka ị kpọtụrụ anyị ma cheta na ị nwere onwe gị ịkpọtụrụ anyị.Chọgharịa ụlọ ngosi ihe ntanetị anyị ka ịhụ ihe anyị nwere ike imere gị.Wee zipu anyị nkọwapụta ma ọ bụ ajụjụ gị taa.

    Nkọwa ngwaahịa

    Ngwaahịa a bụ ngwaahịa laminated nke mere na chemical ọgwụgwọ nzube alkali-free iko ákwà dị ka akwado ihe, site na-ekpo ọkụ na ịpị na elu Tg epoxy resin dị ka binder.It nwere elu n'ibu ike n'okpuru elu okpomọkụ, na ezi eletriki kwụsie ike n'okpuru elu elu. iru mmiri.The thermostability bụ ọkwa F, adabara ụdị ọ bụla nke moto, electric ngwa, eletrọnịki na ndị ọzọ ubi.

    Atụmatụ

    1.Good eletriki kwụsie ike n'okpuru elu iru mmiri;
    2.High n'ibu ike n'okpuru elu okpomọkụ,
    na n'ibu ike njigide ọnụego≥50% n'okpuru 180 ℃;
    3.Moisture eguzogide;
    4.Heat na-eguzogide;
    5.Temperature nguzogide: ọkwa H

    asdasf

    Ndekọ arụmọrụ isi

    Dabere na GB/T 1303.4-2009 Igwe ọkụ na-ekpo ọkụ resin ụlọ ọrụ mmepụta ihe siri ike laminates - Nkebi 4: epoxy resin hard laminates.

    Ọdịdị: elu kwesịrị ịdị larịị, nke na-enweghị afụ, olulu na wrinkles, ma a na-ahapụ ntụpọ ndị ọzọ na-adịghị emetụta ihe eji eme ihe, dị ka: ncha, ntinye, ntụpọ na ntụpọ ole na ole. A ga-egbutu ọnụ ya nke ọma, na Agaghị ewepụ ihu ngwụcha wee gbawaa.

    Ngwa

    Kwesịrị ekwesị maka ụdị moto niile, ngwa eletriki, eletriki na mpaghara ndị ọzọ.

    Ndekọ arụmọrụ isi

    Mba. ITEM UNIT Uru INDEX
    1 Njupụta g/cm³ 1.8-2.0
    2 Ọnụego nnabata mmiri % ≤0.5
    3 Ike ịgbagọ kwụ ọtọ Nkịtị Ogologo ụzọ MPa ≥450
    Kehoraizin ≥380
    180±5 ℃ Ogologo ụzọ ≥250
    Kehoraizin ≥190
    4 Ike mmetụta (ụdị chapy) Enweghị oghere Ogologo ụzọ KJ/m² ≥180
    Kehoraizin ≥137
    5 Ike mkpakọ Ogologo ụzọ MPa ≥500
    Kehoraizin ≥250
    6 Ike ọdụdọ Ogologo ụzọ MPa ≥320
    Kehoraizin ≥300
    7 Ike eletrik kwụ ọtọ
    (na mmanụ nke 90 ℃ ± 2 ℃)
    1mm KV/mm ≥17.0
    2mm ≥14.9
    3mm ≥13.8
    8 Parallel mmebi voltaji (1 min na mmanụ nke 90 ℃ ± 2 ℃) KV ≥40
    9 Ihe mgbasa dielectric (50Hz) - ≤0.04
    10 Mgbochi Mgbochi Parallel Nkịtị Ω ≥1.0×1012
    Mgbe ịsachara maka awa 24 ≥1.0×1010

    Anyị na-eche mgbe niile ma na-eme ihe kwekọrọ na mgbanwe nke ọnọdụ, na-eto eto.We purpose at the achieve of a richer mind and body as well as living for Factory making China Fiberglass Reinforced Plastic Sheet Laminated, Ime ihe n'eziokwu bụ ụkpụrụ anyị, nkà usoro bụ anyị ịrụ, ọrụ bụ anyị lekwasịrị, na ahịa 'afọ ojuju bụ ogologo okwu anyị!
    Ime ụlọ ọrụAkwụkwọ ikike nchekwa ọkụ China, Mpempe akwụkwọ Polyimide eletriki, Afọ ojuju ndị ahịa bụ ihe mgbaru ọsọ anyị.Anyị na-atụ anya nkwado gị na ịnye ọrụ anyị kacha mma n'ọnọdụ gị.Anyị ji obi ụtọ na-anabata gị ka ị kpọtụrụ anyị ma cheta na ị nwere onwe gị ịkpọtụrụ anyị.Chọgharịa ụlọ ngosi ihe ntanetị anyị ka ịhụ ihe anyị nwere ike imere gị.Wee zipu anyị nkọwapụta ma ọ bụ ajụjụ gị taa.


  • Nke gara aga:
  • Osote:

  • Ngwaahịa ndị emetụtara